Để đạt chất lượng in ấn tốt nhất mà

Để đạt chất lượng in ấn tốt nhất màng phải phẳng. Vì màng nhăn nên khi in xuất hiện đường trắng trên hình in.MÀng vừa thổi ra còn nóng tiếp xúc với rubber roller, làm giảm sự đàn hồi rubber roller dẫn đến hơi lọt vào màng một ít. Tích tụ nhiều ngày hơi dồn ở ống đồng số 2 dẫn đến màng nhăn.Khi phát hiện hiện tượng dồn hơi ở ống đồng số 2 đã xả hơi.

Results (English) 1:

To achieve the best printing quality, the film must be flat. Because the film is wrinkled, white lines appear on the printed image when printing. The hot blown film comes into contact with the rubber roller, reducing the rubber roller's elasticity, leading to a little bit of steam entering the film. Vapor accumulation over many days in copper tube No. 2 leads to wrinkling of the film. When detecting the phenomenon of steam accumulation in copper pipe No. 2, the steam was released.

Results (English) 2:

In order to achieve the best printing quality, the film must be flat. Because it looks like white, it appears on the image.
The blown out film comes into contact with the rubber roller, reducing the elasticity of the rubber roller and causing steam to enter the film. Accumulation in No. 2 copper tube for a few days can lead to wrinkled film.
When we found gas accumulation in the No. 2 copper tube, we deflated.

Results (English) 3:

In order to obtain the best printing quality, the film must be flat. Because the film has wrinkles, white lines will appear on the image when printing.
The leather is still hot when it is just blown out, and it contacts with the rubber roller, which reduces the elasticity of the rubber roller and leads to a slight infiltration into the film. It accumulated in the No.2 copper tube for several days, resulting in wrinkles.

When the evaporation phenomenon of No.2 copper tube was detected, it was discharged.