Results (
English) 2:
[Copy]Copied!
How to Jumpstart And Off Machine
- How to open, turn off a desktop computer too familiar with the user but for laptops, said a certain number of skills are essential. When you open up the display to launch, operations have to be very gentle. Place the laptop on a fixed plane, left hand holding the camera body, right hand holding the middle part of the upper body slightly pulled up. Note most of the laptops currently only allows us to open an angle of no more than 160 degrees, if you try to open more than this angle will result in damage to the axis connecting the monitor to swivel the camera body, heavier may rupture cable signaling to the screen.
- When shutdown to ensure the machine is turned off completely before closing the screen. Note the folding machine to observe whether there are any foreign objects blocking the screen and keyboard or not. There have been cases where users try to cover the screen were not sure because of ballpoint pens, leading to a broken axle.
- Many myths are just close the screen will automatically turn off. In fact, when the temporary folding screen, the computer switched to standby mode, all data and the source remains active. So will very dangerous when moving the machine at this time. All though a slight bump can also lead to data loss.
- In addition, when the machine is in standby mode still radiating heat from the battery is working, if the rush to lay low on the bag will cause heat, warm-up leading to reduced life of the machine and battery. So, necessarily shutdown completely before you move off. If you see a hot machine, the wait for a while to cool down the machine and then put in a dedicated bag.
Being translated, please wait..
