Bước 8: Lắp HDD/SSD/ODD:+ Các bạn t

Bước 8: Lắp HDD/SSD/ODD:
+ Các bạn tháo khay để HDD/SSD/ODD trong vỏ case ra và lắp cố định lại bằng vít nhé.
+ Trong box theo HDD/SSD/ODD đã có các cable kết nối với Mainboard. Các bạn nối cable này giữa ổ lưu trữ với main board nhé. Cable tín hiệu chuẩn hiện nay là sata 3 có khe cắm hình chữ L để chống cắm ngược nên các bạn yên tâm không phải lo bị cắm ngược nữa nhé.
+ Cắm cable nguồn cho ổ lưu trữ. Trên PSU đã có sẵn cho bạn dây cấp nguồn cho ổ lưu trữ của bạn, bạn nhớ cắm nguồn vào nhé.

Results (English) 1:

Step 8: insert the HDD/SSD/ODD:+ The you remove the tray to HDD/SSD/ODD in the shell case out and fixed with screws.+ In the box under the HDD/SSD/ODD has had the cable connected to the Mainboard. You connect the cable between the storage drive to the main board. The current standard signal cable is sata 3 L-shaped slots to plug in backwards so you rest assured not to worry about being plugged in backwards.+ Plug cable source for storage drive. On the PSU was available to you for power supply cord storage drive, you remember the source plug-in.

Results (English) 2:

Step 8: Installing the HDD / SSD / ODD:
You remove the tray + HDD / SSD / ODD in the case shell and mounted by screws to offline.
+ In the box under HDD / SSD / ODD have the cable connected Mainboard. The cable connection between your storage drive to the main board offline. Cable standard current signal is sata 3 L-shaped slot against reverse plug so you do not have to worry about being comfortable in contrast to plug ahead.
+ Plug the power cable to the drive. On your PSU is available for power supply cable for your storage drive, you remember plugged into offline.